Service hotline: 4000-555-086
Products Products
Products 产品详情
产品名称:

RS-HD116-AO(AHD) Nextchip 2440+Sony 322

Date: 2016-12-27

Technical characteristics:
1、Use 1/3 Sony 322 image sensor, Output TVI+AHD 1080P+ CVBS 960H, OSD menu support 12
different languages.
2、With high definition 1080P, effective resolution is up to 1920*1080, no delay、no compress、low
loss and real-time transmission, low noise.
3、With 2D/3D NR, D-WDR, motion detection, privacy protection, de-fog, sens-up functions.
4、P/N system、multiple mirror image mode and day-night mode can be switched by OSD, built-in
specific image HOLD (freezing) function.
5、1.25*5pin double BNC output interface, TVI/AHD /960H output switch freely (support switching
socket pins )
6、Support UTC connection with DVR device (Take the below demonstration for details)
7、Solid aluminum electrolytic capacitor is used, which is anti-interference. Power & video dual
lightening protection design is applied: Direct contact anti-thunder 8KV, air contact anti-thunder
16KV.
8、PCB is OSP antioxidant with 32*38 dual border design, Transmission distance is up to
600meters by coaxial cable.

1、Operations for part of product functions:
Description for video signal output(factory default):
TVI interface output TVI 1080P signal, AHD interface output AHD 1080P signal, CVBS
960H signal will be output from AHD interface after being switched.
AHD mode:
(1) PAL/NTSC: press down button of OSD cable for 5 seconds, the system will be
switched from PAL to NTSC (the default is PAL), Re-press the down button for 5
seconds again, the system will be changed from NTSC to PAL.
(2) AHD/CVBS: Press left button for 5 seconds, the video output will be switched from
AHD to CVBS(the default output is AHD)
(3) CVBS/AHD: Press right button for 5 seconds, the video output will be switched from
CVBS to AHD.
TVI mode:
(1) PAL/NTSC: Main menu- Setting- Adjustment-Image adjustment- PAL switched to
NTSC & NTSC switched to PAL.

 

2、UTC technique introduction:
UTC means Up the Coax (UTC), transferring 2 kinds of signal via general coaxial cable.
One is image signal, the other is control signal. Use coaxial cable to transfer video
signal and control signal from cameras at the same time, Through the function; you can
control the cameras by DVR with UTC function easily, including OSD menu parameter
setting and so on.


3、UTC function operation demo:
(1 )Enter into IE interface through DVR IP address

RS-HD116-AO(AHD) Nextchip 2440+Sony 322

(2 )Enter into main menu interface through DVR

RS-HD116-AO(AHD) Nextchip 2440+Sony 322

RS-HD116-AO(AHD) Nextchip 2440+Sony 322

 

 

4 、Product effect picture:
1920*1080 CS 4mm

RS-HD116-AO(AHD) Nextchip 2440+Sony 322

 

6、Product structure& wiring definition diagram:

RS-HD116-AO(AHD) Nextchip 2440+Sony 322

RS-HD116-AO(AHD) Nextchip 2440+Sony 322

 

RS-HD116-AO(AHD) Nextchip 2440+Sony 322

Address: 2,3,4/F,Bldg D, Wei Yulong Industrial park,No.16 Huancheng North Rd,Bantian,Longgang,Shenzhen,China
Tel: 86-755-85225969 
Fax: 86-755-85225809
邮编:330520
Copyright ©2007 - 2017 深圳市睿视科技有限公司